20 Rising Stars To Watch In The Repairs To Upvc Windows Industry
20 Rising Stars To Watch In The Repairs To Upvc Windows Industry
Blog Article
Repairs to uPVC Windows
uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't get rusty or decay.
Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs and increase energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is essential to ensure that your windows are in good shape.
For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. However when you have double pane windows that are anchored by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation you'll need locate some plastic spacers that help the new pane to fit perfectly into the window frame.
If you're planning to attempt to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor and could be trampled.
It's a great idea to seal the gap after the glass has been removed. This will stop drafts and water from getting into your home until a professional comes out to fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the door and the window is significant, you may prefer a security screen that also has an opening. This will provide the best of both.
2. Sagging
Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a number of problems, including sliding. A sagging uPVC window can cause problems with light, draughts, and even security. It's crucial to act immediately if you realize that your uPVC windows are sagging.
Repositioning the hinges can help fix a window that is sliding. First, you'll need to unblock the windows so you can reach the frame. Then, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in the right position.
If you cannot reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are watertight and draught-proof.
uPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it can be due to the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close your window and do an experiment to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.
3. Water Leaks
If you're waking up to damp floors and mouldy walls each time it rains, it's crucial to take action. Windows that leak water do not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.
This is a fairly simple fix that can be done by any competent DIYer. Depending on how serious the issue is, the old caulking may need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.
It is important to check that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.
Mold spots and rotten sills are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.
If the leakage is occurring between the double-glazed glass it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges could be the reason if your uPVC window is difficult to open or it opens in an ease. They can be easily repaired by any skilled DIYer and can be completed in just a few minutes.
Like any mechanical component hinges are prone to wear out over time. It is essentially a very simple process but it can be easier with someone else to assist in holding the frame in place.
It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should open.
The issue could be caused either by opening the window improperly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be pleased to offer you suggestions.
It is also important to grease the hinges regularly. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by different things. Firstly the hinges, again due to wear and tear may become displaced, which can cause an opening to appear where the sash joins the frame. These can be easily repaired by giving them good clean, but if they are beyond repair it might be necessary to have them realigned website or replaced. Secondly the interlock, this is located on the hinge of the window and can be misaligned. Again, it's feasible to give them a good clean, but in certain cases, it may be necessary to get them replaced.
The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce the risk of draughts.
Another method of reducing the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking out cold air.
With a little maintenance and repairs, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is essential to remember that all windows will eventually wear out and it could be cheaper to replace them than to repair them. If you have any problems with your window made of upvc it is recommended to speak with an expert immediately.